파킹세일 오픈마켓의 매력

파킹세일 오픈마켓은 고객이 필요로하는 상품을 가장 쉽게 찾을 수 있는 다양한 검색조건을 지원합니다. 등록된 상품의 키워드와 연관된 상품을 합리적인 기법으로 검색하여 노출하며 쉬운 구매를 유도합니다. 어디에서도 찾을 수 없는 상품을 고객님께 보다 쉽게 노출하여 상품 검색의 노력을 최소화 할 수 있도록 지원합니다. 파킹세일과 함께 성공적인 사업을 영위하여 보십시오.

파킹세일 오픈마켓 입점관련 안내

파킹세일 오픈 마켓에서는 제품을 직접 제조하거나 수입하시는 기업이나 개인의 입접을 기다립니다. 파킹세일을 통하여 새로운 가능성을 찾아 보시기 바랍니다. 파킹세일 오픈마켓은 산업용품, 안전용품, 생활용품, 산업용공구, 각종철물, 어린이안전용품, MRO품목에 대하여 상품판매자 만을 위한 공간을 제공하는 명실상부한 오픈마켓을 제공합니다. 꿈과 열정을 가지고 사업의 성공을 희망하는 여러분에게 날개를 달아 드립니다.

9B-델타 타이어킬러(Tire Killer)/Sabre Tooth TC3, TC8, TC12, TC14, TC20, TC22, TC28) – 물리적 테러방지 시스템

  • 4killerpicc
  • a11222

9B-델타 타이어킬러(Tire Killer)/Sabre Tooth TC3, TC8, TC12, TC14, TC20, TC22, TC28) – 물리적 테러방지 시스템

델타 타이어킬러(Tire Killer)/SABRE TOOTH TC3 /TC8 /TC12 /TC14 /TC20 /TC22 /TC28) – 물리적 테러방지 시스템

모델명 : SABRE TOOTH TC3 /TC8 /TC12 /TC14 /TC20 /TC22 /TC28

제품명 : Sabre Tooth Controllers

적용목적 : 단방향 출입통제

Product Description

* 다양한 옵션이 있으며, 설치기준에 따라 완벽하게 시공하여야 공인된 성능을 발휘할 수 있습니다.

* 설치비는 별도입니다.

* 주문후 12주가 소요됩니다.

TC3 Sabre Tooth Conversion Modules
The TC3 Sabre Tooth Conversion Modules are designed to convert obsolete spring wire controllers to Sabre Tooth operation. The drawing shows a module in place on a P-O-M frame.Adapter strips are welded to existing I-ground frames and then modules are bolted to strips.
  • Module size 12 inches long x 8.5 inches wide
  • Adapter strips 72 inches wide and 12 inches long
  • Three Sabre Teeth per module
  • Long life torsion springs
  • Top plate – Alert Red, Teeth – Zinc plated
  • Weight 120 pounds, approximately
  • Latch Down mechanism available

 

TC8
The TC8 is designed to mount on an existing drive or ramp (concrete or asphalt) with bolts or epoxy to eliminate excavation and drainage problems. By installing units end to end, any width driveway can be controlled.
  • 36 inches long x 20 inches wide x 2 inch high (teeth depressed)
  • Overall height 4.4 inches (teeth extended)
  • 3 removable and reversible 3 tooth modules (12 inches long)
  • Long life torsion springs
  • All welded steel frame (.250 plate)
  • Body – Alert Red, Teeth – Zinc plated
  • Weight (36 inch unit) 155 pounds, approximately
  • Latch down mechanism available

 

 

TC12 Shallow Frame Sabre ToothT Controller Flush Mount
  • 72 inches long x 8 inches wide x 1.5 inch deep
  • 3 Tooth modules (12 inches long)
  • Long life torsion springs
  • All welded steel frame Reinforcing bar runners on each side of body for pull strength
  • Top plate – Alert Red, Teeth – Zinc plated
  • Weight 20 pounds per module, approximately Latch down mechanism available

 

 

TC14
The TC14 Standard is named as such because it is “The Industry Standard.”

  • 72 inches long x 10 inches wide x 4.2 inches deep
  • 20 Sabre teeth (3/8 inch steel plate)
  • Teeth sprung in pairs
  • Long life torsion springs
  • All welded steel frame (.188 plate)
  • Top Plate – Alert Red, Teeth – Zinc plated
  • Weight 130 pounds, approximately
  • Special latch down units available

Shallow Frame

  • 72 inches long x 8 inches wide x 1.5 inch deep
  • 3 Tooth modules (12 inches long)
  • Long life torsion springs
  • All welded steel frame Reinforcing bar runners on each side of body for pull strength
  • Top plate – Alert Red, Teeth – Zinc plated
  • Weight 20 pounds per module, approximately Latch down mechanism available

 

TC20 Non-Penetrating Traffic Barrier Flush Mount
The TC20 stops wrong way vehicles by locking its barrier strips into an upright position. The locked plate modules form a steel curb over which a wrong way vehicle must pass. These barriers stop all but the most errant driver. The barrier plates have rounded corners for pedestrian traffic.
  • 72 inches long x 10 inches wide x 4.2 inches deep
  • Long life torsion springs
  • All-welded steel frame
  • Top plate – Alert Red, Teeth – Zinc plated
  • Weight 145 pounds, approximately
TC22
The TC22 combines all the features of the TC20 above but in a surface mount configuration. It mounts on an existing drive or concrete or asphalt ramp, eliminating excavation and drainage problems
  • 36 inches long x 20 inches wide x 2 inches high (barrier strips depressed)
  • 3 removable and reversible 3 tooth modules (12 inches long
  • Long life torsion springs
  • All-welded steel frame(.250 plate)
  • Top plate – Alert Red, Teeth – Zinc plated
  • Weight (36 inch unit) 130 pounds, approximately
  • Latch down mechanism available
TC28
The TC28 is designed to handle extra heavy industrial traffic. Locations where axle loading exceeds known highway specifications are easily handled by the TC28. The unique design of the Tandem Tooth incorporates extra strength axles, top plates, frame supports and anchor tabs.
  • Frame dimensions 72 L x 10 W x 4.4D (inches)
  • Allowable load 40,000 pounds
  • Long life torsion springs
  • All welded steel frame
  • Flush installation (bolts recessed)
  • Top plate – Alert Red, Teeth – Zinc plated
  • Frame epoxy undercoated
  • Shipping weight 150 pounds, approximately
  • Latch down mechanism available

Reviews

There are no reviews yet.

Be the first to review “9B-델타 타이어킬러(Tire Killer)/Sabre Tooth TC3, TC8, TC12, TC14, TC20, TC22, TC28) – 물리적 테러방지 시스템”